How to solve the problem when the vibration plate is blocked/not loaded?
Release Time:
2021-11-12
Vibrating disk is an auxiliary feeding equipment for automatic assembly or automatic processing machinery. It can arrange a variety of fastener products in an orderly manner, and assemble all parts of the product into a complete product with automatic assembly equipment, or complete the processing of the workpiece with automatic processing machinery.
Vibrating disk is an auxiliary feeding equipment for automatic assembly or automatic processing machinery. It can arrange a variety of fastener products in an orderly manner, and assemble all parts of the product into a complete product with automatic assembly equipment, or complete the processing of the workpiece with automatic processing machinery.
The vibration plate has the advantages of simple structure, reliable operation, easy adjustment and installation, light weight, small size and easy maintenance. In the production process, the vibration feeder can evenly, regularly and continuously give the block and granular materials from the storage bin to the receiving device. The vibration feeder should be checked frequently during operation. Today, we will talk about how to solve the problem when the vibration disk is blocked or not fed.
1. In the process of use, we should pay attention to the fact that the load of the bin can not be directly pressed on the chute of the feeder, which will lead to fatigue damage of the spring plate and the connecting fork for a long time, resulting in the fracture of one of them.
2, may be too much feed, resulting in the accumulation of materials in the frame, lifting resistance screw conveyor force increases, the hopper is not running smoothly caused by, in this case should immediately reduce the amount of feed and maintain uniform feed.
3. The gap between the iron core and the armature of the vibrating plate automatic feeder is too large or too small. If this happens, the machine will not reach the normal amplitude and affect the feeding of the vibrating feeder.
4, it may be caused by the incoordination between the various parts of the vibrating disk automatic feeder, which is mainly caused by the loosening of some parts. It is necessary to adjust the tunability of the parts to adjust the degree of compression of the machine spring plate pressing bolt to the best, so that the chute can reach the amplitude range specified in the production. After understanding the reasons for the blockage of the vibration disk, it is necessary to pay attention to the maintenance of the machine when the machine and equipment are working normally, so as to make its work more efficient and make the entire production line more smooth.
Related News
Follow us
Copyright - 2023 All Rights Reserved. Kunshan Yiheda Intelligent Technology Co., Ltd. www.300.cn SEO